Not Recommended for New Design (NRND)

Recommended Part Number : NuMaker-HMI-M032

The NuMaker-emWin-M032 is an evaluation board for GUI application development on emWin library. The NuMaker-emWin-M032 consists of two parts: a NuMaker-M032KI main board and a NuTFT extension board. The NuMaker-emWin-M032 is designed for project evaluation, prototype development and validation with power consumption monitoring function.

The NuMaker-M032KI consists of two parts: an M032KI target board and an on-board Nu-Link2-Me debugger and programmer. The M032KI target board is based on NuMicro M032KIAAE. For the development flexibility, the M032KI target board provides the extension connectors of M032KIAAE, the Arduino UNO compatible headers and the capability of adopting multiple power supplies. Furthermore, the Nuvoton-designed ammeter connector can measure the power consumption instantly, which is essential for the prototype evaluation.

In addition, there is an attached on-board debugger and programmer “Nu-Link2-Me”. The Nu-Link2-Me supports on-chip debugging, online and offline ICP programming via SWD interface. The Nu-Link2-Me supports virtual COM (VCOM) port for printing debug messages on PC. Besides, the programming status could be shown on the built-in LEDs. Lastly, the Nu-Link2-Me could be detached from the evaluation board and become a stand-alone mass production programmer.

The NuTFT can be plugged into the main board via the Arduino UNO extension connector. The NuTFT is equipped with one SPI Flash, one ILI9341 2.4” SPI TFT LCD touch panel, one five-direction joystick and two push buttons.

Board Features

NuMaker-M032KI Main Board Features

NuTFT Extension Board Features

Nuvoton Official Forum

Nuvoton eStore

TechDesign eMarket(Partner Channel)

*Ordering Number: NK-M032